A fusion architecture to deliver multipurpose mobile health services.

Mobile Health (mHealth) services typically make use of customized software architectures, leading to development-dependent fragmentation. Nevertheless, irrespective of their specific purpose, most mHealth services share common functionalities, where standard pieces could be reused or adapted to expedite service deployment and even extend the follow-up of appearing conditions under the same service. To harness compatibility and reuse, this article presents a data fusion architecture proposing a common design framework for mHealth services. An exhaustive mapping of mHealth functionalities identified in the literature serves as starting point. The architecture is then conceptualized making use of the Joint Directors of Laboratories (JDL) data fusion model. The aim of the architecture is to exploit the multi-source data acquisition capabilities supported by smartphones and Internet of Things devices, and artificial intelligence-enabled feature fusion. A series of interconnected fusion layers ensure streamlined data management; each layer is composed of microservices which may be implemented or omitted depending on the specific goals of the healthcare service. Moreover, the architecture considers essential features related to authentication mechanisms, data sharing protocols, practitioner-patient communication, context-based notifications and tailored visualization interfaces. The effectiveness of the architecture is underscored by its instantiation for four real cases, encompassing risk assessment for youth with mental health issues, remote monitoring for SARS-CoV-2 patients, liquid intake control for kidney disease patients, and peritoneal dialysis treatment support. This breadth of applications exemplifies how the architecture can effectively serve as a guidance framework to accelerate the design of mHealth services.

Application of Deep Reinforcement Learning to UAV Swarming for Ground Surveillance.

This paper summarizes in depth the state of the art of aerial swarms, covering both classical and new reinforcement-learning-based approaches for their management. Then, it proposes a hybrid AI system, integrating deep reinforcement learning in a multi-agent centralized swarm architecture. The proposed system is tailored to perform surveillance of a specific area, searching and tracking ground targets, for security and law enforcement applications. The swarm is governed by a central swarm controller responsible for distributing different search and tracking tasks among the cooperating UAVs. Each UAV agent is then controlled by a collection of cooperative sub-agents, whose behaviors have been trained using different deep reinforcement learning models, tailored for the different task types proposed by the swarm controller. More specifically, proximal policy optimization (PPO) algorithms were used to train the agents' behavior. In addition, several metrics to assess the performance of the swarm in this application were defined. The results obtained through simulation show that our system searches the operation area effectively, acquires the targets in a reasonable time, and is capable of tracking them continuously and consistently.

Modelling and Simulation of Collaborative Surveillance for Unmanned Traffic Management.

Unmanned traffic management (UTM) systems rely on collaborative position reporting to track unmanned aerial system (UAS) operations over wide unsurveilled (with counter-UAS systems) areas. Many different technologies, such as Remote-ID, ADS-B, FLARM, or MLAT might be used for this purpose, in addition to the direct exploitation of C2 telemetry, relayed though cellular networks. This paper provides an overview of the most used collaborative sensors and surveillance systems in this context, analyzing their main technical parameters and performance effects. In addition, this paper proposes an abstracted general statistical simulation model covering message encoding, network capacity and access, sensors coverage and distribution, message transmission and decoding. Making use of this abstracted model, this paper proposes a particularized set of simulation models for ADS-B, FLARM and Remote-Id; it is thus useful to test their potential integration in UTM systems. Finally, a comparative analysis, based on simulation, of these systems, is performed. It is shown that the most relevant effects are those related with quantification and the potential saturation of the communication channels leading to collisions and delays.

Sensors and Communication Simulation for Unmanned Traffic Management.

Unmanned traffic management (UTM) systems will become a key enabler to the future drone market ecosystem, enabling the safe concurrent operation of both manned and unmanned aircrafts. Currently, these systems are usually tested by performing real scenarios that are costly, limited, hardly scalable, and poorly repeatable. As a solution, in this paper we propose an agent-based simulation platform, implemented through a micro service architecture, which may simulate UTM information sources, such as flight plans, telemetry messages, or tracks from a surveillance network. The final objective of this simulator is to use these information streams to perform a system-level evaluation of UTM systems both in the pre-flight and in-flight stages. The proposed platform, with a focus on simulation of communications and sensors, allows to model UTM actors' behaviors and their interactions. In addition, it also considers the manual definition of events to simulate unexpected behaviors/events (contingencies), such as communications failures or pilots' actions. In order to validate our architecture, we implemented a simulator that considers the following actors: drones, pilots, ground control stations, surveillance networks, and communications networks. This platform enables the simulation of the drone trajectory and control, the C2 (command and control) link, drone detection by surveillance sensors, and the communication of all agents by means of a mobile communications network. Our results show that it is possible to truthfully recreate complex scenarios using this simulator, mitigating the disadvantages of real testbeds.

Review and Simulation of Counter-UAS Sensors for Unmanned Traffic Management.

Noncollaborative surveillance of airborne UAS (Unmanned Aerial System) is a key enabler to the safe integration of UAS within a UTM (Unmanned Traffic Management) ecosystem. Thus, a wide variety of new sensors (known as Counter-UAS sensors) are being developed to provide real-time UAS tracking, ranging from radar, RF analysis and image-based detection to even sound-based sensors. This paper aims to discuss the current state-of-the art technology in this wide variety of sensors (both academically and commercially) and to propose a set of simulation models for them. Thus, the review is focused on identifying the key parameters and processes that allow modeling their performance and operation, which reflect the variety of measurement processes. The resulting simulation models are designed to help evaluate how sensors' performances affect UTM systems, and specifically the implications in their tracking and tactical services (i.e., tactical conflicts with uncontrolled drones). The simulation models cover probabilistic detection (i.e., false alarms and probability of detection) and measurement errors, considering equipment installation (i.e., monostatic vs. multistatic configurations, passive sensing, etc.). The models were integrated in a UTM simulation platform and simulation results are included in the paper for active radars, passive radars, and acoustic sensors.

Drone Mission Definition and Implementation for Automated Infrastructure Inspection Using Airborne Sensors.

This paper describes a Mission Definition System and the automated flight process it enables to implement measurement plans for discrete infrastructure inspections using aerial platforms, and specifically multi-rotor drones. The mission definition aims at improving planning efficiency with respect to state-of-the-art waypoint-based techniques, using high-level mission definition primitives and linking them with realistic flight models to simulate the inspection in advance. It also provides flight scripts and measurement plans which can be executed by commercial drones. Its user interfaces facilitate mission definition, pre-flight 3D synthetic mission visualisation and flight evaluation. Results are delivered for a set of representative infrastructure inspection flights, showing the accuracy of the flight prediction tools in actual operations using automated flight control.

Complete Systematic Error Model of SSR for Sensor Registration in ATC Surveillance Networks.

In this paper, a complete and rigorous mathematical model for secondary surveillance radar systematic errors (biases) is developed. The model takes into account the physical effects systematically affecting the measurement processes. The azimuth biases are calculated from the physical error of the antenna calibration and the errors of the angle determination dispositive. Distance bias is calculated from the delay of the signal produced by the refractivity index of the atmosphere, and from clock errors, while the altitude bias is calculated taking into account the atmosphere conditions (pressure and temperature). It will be shown, using simulated and real data, that adapting a classical bias estimation process to use the complete parametrized model results in improved accuracy in the bias estimation.